-
Telephone systems
-
Telephones
-
IT
- Purchase
-
Service
- About us
- Login
Siemens S30050-Q2160-X STMA
The STMA (Subscriber and trunk modules for ATM (asynchronous transfer mode)) board offers two features in Hicom 300E V1.0:
- Networking of Hicom 300 systems via ATM networks (PBB = PBX "Backboning")
- Interworking (IW) between narrowband users of a Hicom 300 and wideband (broadband) users of an ATM workstation as well as interworking between 2 Hicom systems.
The STMA has an optical fiber interface with a transmission capability of up to 155 Mbit/s. Since it serves up to 4 2Mbit highways on the system side, only 8 Mbit/s are used. The STMA can be connected to an ATM switch or directly linked with another STMA via an optical waveguide (OWG). The fiber optic interface offers 4 (logical) ports in both operating modes (PBB and IW).
The STMA can be used as a reference clock supplier.
The STMA board can only be used in the Hicom 300 architecture types 80 CMX or 600 ECX.
Two further operating modes for remote Hicom users are planned for Hicom 300 E V2.0 (FUP).
Characteristics of the optical ATM interface are:
Serial 155 MBit/s interface
Transfer rate with SDH/SONET-control: 155.52 Mbit/s (+- 20 ppm)
Transfer rate without SDH/SONET-control: 149.76 Mbit/s
Range of about 2 km (1.24 miles)
Frame: SONET or SDH (STS3c or STM-1), administrable
Product condition "Rebuilt"
This article is used and has been technically examined. It has, in its entirety, undergone extensive quality controls. We offer a one year warranty on this article. You can find more information on our restoration process here.
Product-Category
You can find this item in the following category: